RTTY
[Top] [All Lists]

Re: [RTTY] MTTY and a Linear

To: "'Bill Turner'" <dezrat@copper.net>, <WA3FRP@aol.com>,<k7ybo@arrl.net>, <rtty@contesting.com>
Subject: Re: [RTTY] MTTY and a Linear
From: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Fri, 8 Jun 2007 18:35:16 -0400
List-post: <mailto:rtty@contesting.com>

W6WRT writes: 
> 
> The program WinWarbler lest you set both a transmit and
> return-to-receive delay independently of each other. It also uses
> MMTTY as its RTTY engine so half the work is done. The way I'm using
> it is with keying from a com port. If he is using VOX type keying, I
> am not sure if it will work, but I think he would find it better and
> more reliable to change over to com port keying anyway.

For WinWarbler/DXLab Suite users ... the lead/delay parameter is on 
the CW tab but it applies to all modes. 

73, 

   ... Joe, W4TV 
  

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>