> Date: Tue, 26 Feb 2008 10:33:45 -0800
> From: Kok Chen <chen@mac.com>
> Subject: Re: [RTTY] VP6DX
> To: RTTY Reflector <rtty@contesting.com>
> Message-ID: <76797DD9-235D-430C-9F7D-074812F03969@mac.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes
>
> Another interesting thing is that the news page also mentioned that
> VP6DX is using the microKeyer II interface. The reason it is of
> interest to us is this: if they are using FSK instead of AFSK, the
> actual baud rate from a microKeyer will not be 45.45 baud but it will
> instead be either 45.0 baud or 45.76 baud (depends on which one the
> software decides is "closer").
>
>
> 73
> Chen, W7AY
>
>
This is very interesting, why is this? I thought the speed was set by the
software?
Charlie
Ki5xp
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|