Hello Group, I sadly was forced to miss the TARA RTTY MELEE, due to RFI
problems, and with the ARRL RTTY RU just around the corner I must get this
straightened out.
Allow me to give you a description of my operating conditions...
Rig - TS850
Antenna is R7 @ 55 Feet elevation
Interface is MFJ-1279
PC is Self assembled P4 @ 1.5Ghz
Software is either MMTTY 1.66G and or Writelog and the MMTTY Plug same version.
Now My problems seem to have started when I got rambunctious and decided to
move my shack around a bit, by making items needed in the placement for a good
contest station ... IE PC monitor in the center of rig and amp , it was to the
far right...
All Items have been grounded to my ground bus as it was before, and all worked
well then , but for some odd reason it will not allow me to run more than 50
Watts if I do I get a steady key up no diddles...
I have tried going back to 1.65B no difference so I don't think its a bug in
1.66G
I also added many torrids to various feed lines going to and from the interface
and PC and the rig as well.
I have not even tried running my amp for fear of it locking down at 750 watts
...
I am lost and would like some help or if someone has gone through a similar
situation I would really like to hear from you, what did you do to solve your
RFI problems? Please don't tell me to put the shack back to the way it was, I
really prefer to have it in its current arrangement. hi hi
Regards,
Marc Tessier - VE3TES
ve3tes@cogeco.ca
http://home.cogeco.ca/~ve3tes/
http://www.eQSL.cc/Member.cfm?VE3TES
http://www.qrz.com/ve3tes
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|