Terry, I am using FT-950 since January, but do not know Signalink, sorry.
Used with Rascal inexpensive interfaces - was very happy. Now using micro
Keyer II, also works OK, but in LSB FSK mode.
the manual of FT-950 is not very easy, agree with you, hihi. If you decide
to switch to Rscal-I can help you, but you won't need help I guess,
everything is working "plug and play"...
Good luck.
73's Andrei EW1AR-NP3D
2009/3/25 AA9VZ <AA9VZ@comcast.net>
> I need some help friends getting started. First time in the digital mode. I
> have a Yaesu ft-950 rig using the signa link usb and MMTTY. I am able to
> copy rttty just fine. On transmit I only have a steady mark tone no didles.
> I have tried using the packet setting on the rig since the rtty setting is
> for fsk mode only. You must use the packet setting for afsk modes? The signa
> link is for afsk only? This is worse than any Yaesu HT owners manual Hi
> Hi.............
>
> Thanks for the support my friends....
>
> 73's
>
> Terry AA9VZ
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
--
73's Andrei
EW1AR-NP3D
----------------------------------------------------
DXCC RTTY via LoTW only
Who has what? - World Wide Rating
Please visit: www.k4fo.com/cqrtty/
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|