This normally happens when you lose audio level into the soundcard usually from
a faulty connection from the radio to the audio
input of the sound card. Or perhaps something has changed the Line Input or
MIC input level of the sound card. Go to Windows
Sounds and to Recording properties and try adjust the level to see if you can
get it back to where it was before.
73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com
-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On
Behalf Of allan1@dejazzd.com
Sent: Monday, December 13, 2010 8:58 AM
To: rtty@contesting.com
Subject: [RTTY] Problem with MMTTY
I have been using MMTTY with my Icom Pro 3 for a while with no problem!.
This morning when I clicked on the MMTTY icon-MMTTY
came up. The XY scope is fine, but there was hardly any signal on the graph
nor much of a waterfall. The RF gain was at it's
highest level.
It decodes fine, the macros work as well and it does transmit a signal. I made
no adjustments at all.
Any thoughts as to how to correct the problem would be greatly appreciated
Allan W2TN
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|