On Sun, Jan 16, 2011 at 1:32 PM, Kok Chen <firstname.lastname@example.org> wrote:
> On Jan 16, 2011, at 11:46 AM, Jim Reisert AD1C wrote:
>> According to NewEgg:
>> SIIG IC-510012-S2 : Signal/Noise ratio = 68.5 dB
>> SIIG IC-710012-S2 : Signal/Noise ratio = 92.0 dB
>> How relevant are those S/N ratios for for RTTY?
> It depends.
> If you are using narrow I.F. filters, the answer is probably that you will
> see no difference whatsoever. If you use a good rig and wideband (waterfall)
> modes, then you will see some difference between those two.
Thanks, all. I'll probably just get the 7.1 card anyway. It sounds
like it's probably overkill. I run RTTY on the IC756 Pro III in RTTY
mode but WITHOUT the TPF.
Jim Reisert AD1C, <email@example.com>, http://www.ad1c.us
RTTY mailing list