Hi Nick
You have to set the TS-450 menu to the right setting.
1. Turn the radio off
2. Press and hold in the M.In key and turn on the power.
3 Turn the M.CH/VFO dial to number 38
4. Set to 'Off' by using up or down key.
By default the TS-450 is set backwards. 73
Tom W7WHY
> KA1KIX has a Kenwood TS-450 and is using writelog with a buxcom rascal
> interface. He has to select reverse on the radio and reverse with writelog
> to get it to work. Does anyone have an idea as to the problem here....it
> works fine with both in reverse but he would like to get it setup
> correctly.
> I read the manual but can't find any information on any switches or menu
> changes to correct the problem.
>
> Thanks,
> Nick
> W4GKM
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|