> I tried to check into a RTTY net last night. The net control came
> back with "sounds like someone is trying to check in but I only hear
> the mark tone, check your set up"
This is a typical indication that you are trying to use the RTTY
mode of your transceiver instead of LSB for AFSK. The SignaLink
USB is a *soundcard only* and does not support traditional FSK.
You will need to configure and your transceiver exactly like you
would for PSK31 in order to use AFSK with the Signalink USB.
73,
... Joe, W4TV
On 4/13/2011 8:39 AM, Glenn Jackson wrote:
> I'm new to this and I am having trouble getting set up to do RTTY. I'm
> using Vista (!) Kenwood 570, and Signalink USB. I have been able to make
> PSK contacts using Digipan. I am unable to connect using RTTY, using the
> MTTY program. I have followed the set up in the radio manual and followed
> the set up for the MMTTY program. A lot of the set up is different or
> confusing for Vista, I don't come up with the same pages in the manual. I
> have sent out many CQ's , answered many CQ's no contacts. My SWR meter
> shows that I am transmitting. I tried to check into a RTTY net last night.
> The net control came back with "sounds like someone is trying to check in
> but I only hear the mark tone, check your set up" I have checked everything
> that I know how to check any thoughts??? Any help will be appreciated.
>
>
>
> KB1NGD GLENN
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|