ORIGINAL MESSAGE:
On Fri, 08 Feb 2013 08:36:22 +0000, you wrote:
>It's those that WILL send numerous CR and LF at the end of their
>exchange macro!!
>Chasing it up the screen is a pain.
REPLY:
If you're using N1MM Logger, there are two things you can do that will
almost completely eliminate chasing things up the screen:
1. In the DI window, click Setup>Settings and check the box that says
"Remove excess line feeds". This allows only one line feed at a time.
2. At the end of all macros except F5, put {END}{CLRRX}. This will clear
the RX screen so the incoming text will start at the top of the RX window.
The reason not to put it at the end of F5 is it interferes with the ESM
function.
Problem solved.
Bill, W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|