Hi Guys,
Until now, I have only decoded RTTY with either one version of MMTTY or
2Tone running at the same time. I'm getting ready to run MMTTY and 2Tone at
the same time and have some questions:
1) Using N1MM Logger and MMTTY, I have a great deal of problems getting
any computer to decode RTTY quickly and not slowing down during a contest.
I'm not sure, but I believe the slow decode problem is a result of updates
done to N1MM Logger or MMTTY, or both. I say that because 2-3 years ago I
didn't have as great a problem with delayed decoding. So my first question
is: since I already have problems with my computers slowing down during a
contest with only one version of MMTTY running, won't this problem increase
if I run multiple copies of MMTTY or 2Tone at the same time? (note: I've
tried 3 different Windows 7 computers and only one of them will decode
quickly most of the time without slowing down as the contest goes on, and
that's
my office computer which I have to borrow before a contest)
2) I'm using a K3 and the decode audio comes from the Line Out on the rear
of the K3. If I want to split this audio and run it to two different
CPU's can I use a simple Y adapter with excellent results, or would I get
likely reduce noise or distortion if I used a Distribution Amp instead of a Y
adapter?
Thanks & 73,
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|