Not with WriteLog. It gets turned off and on automatically in N1MM Logger I
think.
73, Don AA5AU
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Jerry Pixton
Sent: Sunday, April 07, 2013 7:03 PM
To: rtty@contesting.com
Subject: Re: [RTTY] Contesting w/ 2 Tone & MMTTY
Is there any way to turn Net off in 2Tone. I used 2Tone for a few hours but
stayed in S&P because I did not want my Run frequency to
wander all over. My Flex 5000 is AFSK.
Or for running do I want to make mmtty the primary rttyrite window and use
2Tone in a clone window.
BTW: I had random occasions where AFC (in mmtty) did not turn on upon logging
the qso. But often it did. Very random.
Jerry, W6IHG
On 4/7/2013 7:07 PM, Mike wrote:
> 2 Tone was used along with MMTTY in the recent EA RTTY Contest. What
> a difference having two different decoders working on the same signal.
> Most of the time, both displayed the same information. However, there
> were enough differences to having both decoders a true benefit. Which
> one was better - depends. But then that is to be expected as both are
> very good.
--
-----------------------------------------------
Dr. Jerry R. Pixton, PIXOS Designs
http://www.shentel.net/pixosdesigns/RadioTuner/
jpixton@shentel.net
-----------------------------------------------
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|