Hi Guys,
I'm finally setup with 2 RTTY Windows: MMTTY & 2Tone. And I've got a
couple of problems:
1) As soon as I added the 2Tone as my 2nd window, I noticed the audio
level on the MMTTY window dropped about two-thirds and MMTTY doesn't decode
very well anymore.
2) 2Tone decodes the received signals fine but only decodes my transmit
message about one-third of the time. Any ideas how I can get it to decode my
transmit message all the time?
Rig: K3 feeding a Windows 7 computer motherboard soundcard from the fixed
audio output jack on the rear of the K3.
Thanks!
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|