ORIGINAL MESSAGE: (may be snipped)
On Fri, 20 Sep 2013 22:16:46 -0500, K0RC wrote:
>MMTTY can run 75 Baud but only on AFSK.
REPLY:
Say what? Is that a typo?
I have used MMTTY at 75 baud for years with FSK. All that is needed is to go
to the Decode tab and change the baud rate.
I use direct com port output driving a homebrew transistor keyer to the
IC-7600's FSK input. Works fine, either 45.45 or 75 baud.
73, Bill W6WRT
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|