RTTY
[Top] [All Lists]

Re: [RTTY] Being the fox - pileup running

To: rtty@contesting.com
Subject: Re: [RTTY] Being the fox - pileup running
From: Mark Perrin <n7mq@comcast.net>
Date: Wed, 26 Feb 2014 15:41:12 +0000
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Agreed; and use Bob's suggestion of using the call of station respond to twice, both at beginning and at end of response. Will make things go faster.

Mark N7MQ

On 2/26/2014 3:34 PM, Don AA5AU wrote:
No, I think running split is the best way to go. Simplex RTTY pileups are much 
worse.

Don AA5AU



________________________________
From: Stanley Zawrotny <k4sbz.stan@gmail.com>
To: "James C. Hall, MD" <heartdoc@nwtcc.com>
Cc: "rtty@contesting.com" <rtty@contesting.com>
Sent: Wednesday, February 26, 2014 9:19 AM
Subject: Re: [RTTY] Being the fox - pileup running


When I see stations operating split on digital I see so much confusion from the 
hams that don't know how to operate split properly that I wonder if it is worth 
all the QRM that it causes. Plus it ties up two freqs, which isn't bad in 
normal times, but can be a concern during a contest. Perhaps a slugfest on 
simplex is better.

Stan, K4SBZ

"Real radio bounces off the sky."

On Feb 25, 2014, at 10:29 PM, "James C. Hall, MD" <heartdoc@nwtcc.com> wrote:

Hi All:

I will be W1AW/4 during the 3rd week of March running RTTY. I need a little 
advice. I, like many, use N1MM with MMTTY and 2Tone for demodulation during 
contests. Being the 'DX' for this one means potentially split operation, 
something I do routinely to put DX in the log when I'm chasing - but not being 
the DX.

On our DX club reflector, it was suggested that I consider MMVARI and use its 
multi-channel RX and browser. This sounded appealing to me as I could use my 
mouse and just click the QSO's into the log (using DXpedition mode). I'm set up 
for FSK operation. With a waterfall type operation, I worry about not tight 
enough filters to effectively copy the signal. It looks good and I'm reading 
more on it such as using the Align button to get the target signal properly 
tuned. I'll use either my Mark V or my K3. I do have a P3 panadapter, so that's 
another option to line up and click signals.

I plan on starting simplex and using stacking. If it gets too thick, I'll run 
split. Stacking looked like a good idea for DX'ing until you realize that 
there's a lot of jumping around on the frequencies in the split window - 
probably not practical. My macro responses will be designed for speed - 
probably as short as Ed W0YK's !

So, what do DXpeditioners et al do ?

73, Jamie
WB4YDL

Sent from my iPad
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty



_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>