RTTY
[Top] [All Lists]

Re: [RTTY] W1AW portables on JT65

To: "'Don Hill AA5AU'" <aa5au@bellsouth.net>
Subject: Re: [RTTY] W1AW portables on JT65
From: "Ed Muns" <ed@w0yk.com>
Reply-to: ed@w0yk.com
Date: Wed, 28 May 2014 21:49:12 -0700
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
I don't think JT65 makes sense unless the RTTY rate drops way off.  OTOH,
there is typically more JT65 on 160m than RTTY.  I recall that you don't
have a 160m antenna, but with JT65 you may be surprised what you can work
using your 80m dipole on 160m.

Ed W0YK

-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Don Hill AA5AU
Sent: 28 May, 2014 20:25
To: 'RTTY'
Subject: [RTTY] W1AW portables on JT65

Since this is the "RTTY" reflector, I think I already know what kind of
answers I'll get with this one, but here goes.

I'm going to be operating W1AW/5 next week and will be doing a lot of RTTY.
My thoughts are that I will not operate JT65 because of
how slow it is. I have worked other W1AW portable stations on JT65 but I
just don't see the value in using a mode that takes 5
minutes to make one contact. Don't get me wrong, I really like JT65 and have
over 1500 JT65 contacts in the log in the past 2 years.
But...

Is there any value at all to operating JT65 from W1AW portable operations?
Does the rate get so slow toward the end that JT65 then
becomes acceptable in spite of its slow rate?

Thanks,
Don AA5AU



_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>