Thom, please check the following URL's:
http://www.rigexpert.com/index?f=tshooting
The file is named _RE2EXTFSK program_
(http://www.rigexpert.com/index?f=downloads#other)
This is the troubleshoot URL:
http://www.rigexpert.com/index?s=articles&f=re_mmtty_extfsk
Gud luck de Rick W4UEF
In a message dated 11/1/16 11:06:01 P.M. Eastern Daylight Time,
ki8w@ki8w.com writes:
And of course they gave no link on where to get said EXTFSK modified by
Rigexpert.
On 11/2/2016 02:59, DieselCar@aol.com wrote:
Hi Thom,
I do not have a RigExpert TI-8. But I did read that you need MMTTY EXTFSK
DLL that has been modified by the RigExpert Crew for the RigExpert TI-5.
That info is on this URL:
http://www.eham.net/reviews/detail/10207
Gud luck
Rick W4UEF
Furthermore, you *have* to use the EXTFSK DLL that has been modified by
the RigExpert folks
In a message dated 11/1/16 10:44:09 P.M. Eastern Daylight Time,
ki8w@ki8w.com writes:
I have a Kenwood TS-570D...connected to that radio is a Rigexpert TI-8
Digital interface. The interface is connected to the radio using a
Rigexpert custom cable made for the 570D. ACC2 is being used for FSK
operations
Radio Mode is set to FSK
PTT is on Com5
FSK is on Com6.
Both these ports are Virtual Com Ports
I have set up MMTTY according to the instructions in the TI-8
documentation.
Soundcard set to USB Audio Codec for reception and transmission.
In TX PTT and FSK set to Com 6
In Radio Command Port = Com5 8, 2, none Kenwood group
selected.
in MISC TX port set to Com-TxD(FSK) USB set to Limiting speed. I
have tried all 3 selections in this box.
I cannot get MMTTY to key the radio.
Anyone using this Interface (TI-8) that can give me a hand?
Thanks
--
73
Thom KI8W
"Living deep in the black hole of RF"
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
--
73
Thom KI8W
"Living deep in the black hole of RF"
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|