Hi Neil
I use N1MM+ for Rtty but even hitting the tune or mix button directly in smart
SDR will not key the rig,
Thanks
Trevor
EI2GLB
--------------------------------------------
On Wed, 24/1/18, Neal Campbell <nealk3nc@gmail.com> wrote:
Subject: Re: [RTTY] Flex 6000 users
To: "Trevor Dunne" <trevor_dunne@yahoo.com>
Cc: "Bill Turner" <dezrat@outlook.com>, "RTTY Reflector" <rtty@contesting.com>
Date: Wednesday, 24 January, 2018, 14:40
Trevor
What program are
you using for RTTY? I am sure it works (I have been on FT8
primarily outside of contests but the mechanics are the
same).
73
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
See components
used in our computers at:
https://www.amazon.com/shop/abrohamnealllc
On Tue, Jan 23, 2018 at
11:50 PM, Trevor Dunne <trevor_dunne@yahoo.com>
wrote:
Hi
Neil
Is it working for you or is it like mine and will not
tx??
Thanks
Trevor
EI2GLB
------------------------------ --------------
On Wed, 24/1/18, Neal Campbell
<nealk3nc@gmail.com>
wrote:
Subject: Re: [RTTY] Flex 6000 users
To: "Trevor Dunne" <trevor_dunne@yahoo.com>
Cc: "Bill Turner" <dezrat@outlook.com>,
"RTTY Reflector" <rtty@contesting.com>
Date: Wednesday, 24 January, 2018, 4:02
I am also!
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
See
components used in our computers at:
https://www.amazon.com/shop/
abrohamnealllc
On Tue, Jan 23, 2018 at 10:43
PM, Trevor Dunne via RTTY <rtty@contesting.com
> wrote:
> I am in RTTY,
>
>
> Thanks
> Trevor
> EI2GLB
>
>
------------------------------ --------------
> On Wed, 24/1/18, Bill Turner <dezrat@outlook.com>
wrote:
>
> Subject:
Re: [RTTY] Flex 6000 users
> To:
"RTTY Reflector" <rtty@contesting.com>
> Date: Wednesday, 24 January, 2018,
2:29
>
> I have a
Flex 6300 and it does go
> all the way
up to 10.149.9 and keys
> normally.
Are you in RTTY mode or something
>
else?
>
> 73, Bill
W6WRT
>
>
> ------------
>
ORIGINAL MESSAGE ------------(may be snipped)
>
> On Wed, 24 Jan 2018
01:26:01 +0000 (UTC), you
> wrote:
>
> >Hi All
> >
> >I wonder
is there
> anyone here using any of the
6000 series Flex radios.
> >
> >I have an issue on 30m
> using smart sdr in RTTY mode I can not
tx above 10.145.0 no
> matter how I key
the radio,
> >
> >My limited understanding is that in
RTTY
> mode my dial frequency should be
within band all the way up
> to
10.149.8 ??
> >
> >Is
> that
correct can anyone here using a flex test it and see if
> you can tx that high.
> >
> >
> >Thanks
>
>Trevor
> >EI2GLB
>
______________________________ _________________
> RTTY mailing list
>
RTTY@contesting.com
> http://lists.contesting.com/
mailman/listinfo/rtty
>
>
______________________________ _________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/
mailman/listinfo/rtty
>
______________________________ _________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/
mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|