That definitely sounds like a hardware problem. Have you asked Tim or
Dudley about it (from Flex)?
Neal Campbell
Abroham Neal Software
www.abrohamnealsoftware.com
See components used in our computers at:
https://www.amazon.com/shop/abrohamnealllc
On Wed, Jan 24, 2018 at 10:32 AM, Trevor Dunne <trevor_dunne@yahoo.com>
wrote:
> Hi Neil
>
> I use N1MM+ for Rtty but even hitting the tune or mix button directly in
> smart SDR will not key the rig,
>
>
> Thanks
> Trevor
> EI2GLB
>
> --------------------------------------------
> On Wed, 24/1/18, Neal Campbell <nealk3nc@gmail.com> wrote:
>
> Subject: Re: [RTTY] Flex 6000 users
> To: "Trevor Dunne" <trevor_dunne@yahoo.com>
> Cc: "Bill Turner" <dezrat@outlook.com>, "RTTY Reflector" <
> rtty@contesting.com>
> Date: Wednesday, 24 January, 2018, 14:40
>
> Trevor
> What program are
> you using for RTTY? I am sure it works (I have been on FT8
> primarily outside of contests but the mechanics are the
> same).
>
> 73
>
>
> Neal Campbell
> Abroham Neal Software
> www.abrohamnealsoftware.com
>
>
>
> See components
> used in our computers at:
> https://www.amazon.com/shop/abrohamnealllc
>
>
>
>
> On Tue, Jan 23, 2018 at
> 11:50 PM, Trevor Dunne <trevor_dunne@yahoo.com>
> wrote:
> Hi
> Neil
>
>
>
> Is it working for you or is it like mine and will not
> tx??
>
>
>
>
>
> Thanks
>
> Trevor
>
> EI2GLB
>
>
>
> ------------------------------ --------------
>
> On Wed, 24/1/18, Neal Campbell
> <nealk3nc@gmail.com>
> wrote:
>
>
>
> Subject: Re: [RTTY] Flex 6000 users
>
> To: "Trevor Dunne" <trevor_dunne@yahoo.com>
>
> Cc: "Bill Turner" <dezrat@outlook.com>,
> "RTTY Reflector" <rtty@contesting.com>
>
> Date: Wednesday, 24 January, 2018, 4:02
>
>
>
> I am also!
>
>
>
>
>
> Neal Campbell
>
>
>
> Abroham Neal Software
>
> www.abrohamnealsoftware.com
>
>
>
>
>
>
>
> See
>
> components used in our computers at:
>
> https://www.amazon.com/shop/
> abrohamnealllc
>
>
>
>
>
>
>
>
>
> On Tue, Jan 23, 2018 at 10:43
>
> PM, Trevor Dunne via RTTY <rtty@contesting.com
>
> > wrote:
>
>
>
> > I am in RTTY,
>
> >
>
> >
>
> > Thanks
>
> > Trevor
>
> > EI2GLB
>
> >
>
> >
>
> ------------------------------ --------------
>
> > On Wed, 24/1/18, Bill Turner <dezrat@outlook.com>
>
> wrote:
>
> >
>
> > Subject:
>
> Re: [RTTY] Flex 6000 users
>
> > To:
>
> "RTTY Reflector" <rtty@contesting.com>
>
> > Date: Wednesday, 24 January, 2018,
>
> 2:29
>
> >
>
> > I have a
>
> Flex 6300 and it does go
>
> > all the way
>
> up to 10.149.9 and keys
>
> > normally.
>
> Are you in RTTY mode or something
>
> >
>
> else?
>
> >
>
> > 73, Bill
>
> W6WRT
>
> >
>
> >
>
> > ------------
>
> >
>
> ORIGINAL MESSAGE ------------(may be snipped)
>
> >
>
> > On Wed, 24 Jan 2018
>
> 01:26:01 +0000 (UTC), you
>
> > wrote:
>
> >
>
> > >Hi All
>
> > >
>
> > >I wonder
>
> is there
>
> > anyone here using any of the
>
> 6000 series Flex radios.
>
> > >
>
> > >I have an issue on 30m
>
> > using smart sdr in RTTY mode I can not
>
> tx above 10.145.0 no
>
> > matter how I key
>
> the radio,
>
> > >
>
> > >My limited understanding is that in
>
> RTTY
>
> > mode my dial frequency should be
>
> within band all the way up
>
> > to
>
> 10.149.8 ??
>
> > >
>
> > >Is
>
> > that
>
> correct can anyone here using a flex test it and see if
>
> > you can tx that high.
>
> > >
>
> > >
>
> > >Thanks
>
> >
>
> >Trevor
>
> > >EI2GLB
>
> >
>
> ______________________________ _________________
>
> > RTTY mailing list
>
> >
>
> RTTY@contesting.com
>
> > http://lists.contesting.com/
> mailman/listinfo/rtty
>
> >
>
> >
>
> ______________________________ _________________
>
> > RTTY mailing list
>
> > RTTY@contesting.com
>
> > http://lists.contesting.com/
> mailman/listinfo/rtty
>
> >
>
> ______________________________ _________________
>
> RTTY mailing list
>
> RTTY@contesting.com
>
> http://lists.contesting.com/
> mailman/listinfo/rtty
>
>
>
>
>
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|