Excellent, it works fine!
I want to try and announce this on the www.nrrl.no website befor the test
starts on Saturday, but is this latest fix included in the regular download
of SD on you main page www.ei5di.com now?
> -----Original Message-----
> From: Paul O'Kane [mailto:email@example.com]
> Sent: Thursday, November 30, 2006 1:05 AM
> To: firstname.lastname@example.org; email@example.com
> Cc: Guttorm Amdal
> Subject: Re: [SD-User] SD and NRRL Fylkestest - almost there
> Hello Sverre,
> > .. however ESM in S&P-mode seems not to be operating properly.
> > It seems to be sending the just received exchange rather than the
> > former one as the second Enter is pressed.
> Thanks - you're right! That's fixed and you can get the
> updated SD.EXE (V13.10D) from www.ei5di.com/sd/sdexe.zip.
> The new SD.EXE should replace whatever version you're using
> now - in your SD folder.
> I recommend you use the CWZERO command to set the "Serial
> Padding Factor" to a value of 3. That gives extra spacing
> between the characters sent - and you'll get fewer requests
> for repeats. If you do get a request for a repeat, you will
> have to send it manually (in S&P) mode because, once the QSO
> has been logged, the "former" exchange is updated.
> Paul EI5DI
SD-User mailing list