----- Original Message -----
From: "brian coyne" <g4odv@yahoo.co.uk>
> It was frustrating not to have any reference for QTC
> stations worked,
For DX entrants, the number to the right and above the
callsign field was intended to reflect the actual number
of QTCs available - taking into account the callsign
entered (if any). For example, if you have already sent
7 QTCs to EI5DI, entering EI5DI in the callsign field
should display 3. That's not working now, and I will
fix it.
> My logger was set at 30wpm. I tried, before entering
> 'QTC' to wind down speed to 24wpm using 'page down' On
> entering 'QTC' the message in the first window, ie QTC
> 12/10 was sent at 24wpm, however on entering the next
> window with the list to be sent the speed defaulted
> back to 30wpm.
Thanks - I'll fix that.
> I am confused by QTC rule (b) - does this mean the qtc
> receiving station should not receive his own call
That's correct - it's not implemented correctly in SD.
> I really could not figure what the block 'highligting'
> (page up/down) function in the QTC window was supposed
> to do,
It's not significant. Page Up/Down are not intended to
have any effect while sending QTCs. The display should
not change.
> I have noted one or two logging errors, fortunately
> very few, but the question is if I amend them will
> the changes carry over into the QTC list in the cabrillo
> file?
No - you should edit the QTCs directly in your .LOG
Cabrillo file.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|