Here's what's included in V16.13 to be released
later this week.
If you're interested there's a beta version at
www.ei5di.com/sd/sdb1613.exe
Please let me know if it doesn't work as expected.
73,
Paul EI5DI
_______________________________________________
SD V16.13 (Beta)
Rig-Control:
Improved support for older Yaesu rigs, in
particular FT1000MP, FT817 FT847 and FT897.
Support for SO2R operation updated. It is
enabled with the 2R command, followed by
PORTS to assign a Com Port and Name for
the two radios. Toggle between rigs with
the backslash "\" key.
With the callsign field empty, equals "="
sets the inactive rig to the same frequency
as the active rig. Comma "," swaps
frequencies. The active rig is indicated
by R1 or R2 at either side of the date/time
field.
In mixed-mode events, the mode on the
active rig will correspond to the frequency.
If necessary, use the S (SSB) or C (CW)
commands to switch. The X (eXchange)
command lets you switch sidebands on either
SSB or CW. The CW setting is held for both
rigs on all bands.
B40, B20 etc, and their equivalents 40M and
20M, switch the active rig to the new band -
this may also be done by direct frequency
entry, for example 14020 or 14183.56.
Next step is to add support for SO2V, with
equals "=" and comma "," having similar
functions for VFO A and VFO B.
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|