SECC
[Top] [All Lists]

[SECC] Looking for Concrete suggestions

Subject: [SECC] Looking for Concrete suggestions
From: rvhoeft at intergraph.com (Hoeft, Roger V)
Date: Wed Apr 16 17:22:44 2003
Roger,

You might want to look into your local industrial rental place and see if they 
have - for lack of a better term, a powered wheel barrow.  It seems that KN4RX 
in Huntsville had the same predicament you are in (back yard tower, steep front 
yard / soft soil content).  I recall he rented a gas-powered wheel barrow to 
haul the concrete.  It had much more hauling capacity than a standard Sears 
model and if the rent price is within your range, maybe rent 2 and tag team it 
with a friend.

Best of luck es 73,
        
        Roger ...
        KA9EKJ

-----Original Message-----
From: ku8e@bellsouth.net [mailto:ku8e@bellsouth.net]
Sent: Wednesday, April 16, 2003 4:10 PM
To: secc@contesting.com
Subject: Re: Re: [SECC] Looking for Concrete suggestions



 I would think the only other way to get concrete to the hole you dug if you 
are not hauling it there yourself or having them pump it through a hose from 
the concrete truck is for them to dump it in a wheelbarrel and haul it back and 
forth..... It seems like I have seen concrete at Home Depot where you just pour 
it in the hole and just add water without having to mix it ???? I could be 
wrong since I am not an expert at this ???


                   Jeff

> 
> From: Gary McConville <wb4sq@yahoo.com>
> Date: 2003/04/16 Wed PM 02:50:57 EDT
> To: Secc <secc@contesting.com>
> Subject: Re: [SECC] Looking for Concrete suggestions
> 
> Roger,
> 
> Unless the math has changed, it looks like you'll need
> 72 sq ft or 8 cubic yards.
> 
>  
> --- Roger Hackler <rhackler@mindspring.com> wrote:
> > Hey gang,
> > 
> > Hope everyone is well and had a great time in the
> > GQP.  I got on for just a
> > little while and handed out Cobb County on 40 and
> > 20, but family obligations
> > kept me from playing.
> > 
> > So, here's the meat of the question.  I am in the
> > process of putting up a 50
> > foot Universal Aluminum Tower (50-9).  I have the
> > hole dug and it is
> > slightly larger than the dimensions specified by
> > universal.  Universal
> > specifies 4x4x4 and I'm closer to 4x4x4.5.  My
> > calculations come up to just
> > over 2.5 yards of concrete.
> > 
> > The problem is that there is no easy way to get to
> > the hole.  My front yard
> > is very steep, so bringing a full size truck to the
> > back is not an option.
> > I haven't checked, but I imagine that pumping is
> > prohibitively expensive.  I
> > don't relish the idea of carting 200 bags of sacrete
> > to the back and mixing
> > it.
> > 
> > Anyone have any ideas?  This is the first tower I
> > have erected in the US,
> > ant when I did the last one in HL I had the help of
> > your tax dollars (thanks
> > guys!).
> > 
> > As a side note, I'm concerned with the specs (or
> > lack thereof) that
> > universal provided.  The base has no rebar in it. 
> > With a block of that
> > size, I think Rebar is probably a requirement.  Your
> > thoughts?
> > 
> > 73 de KN6RO
> > 
> > Roger Hackler
> > Senior Systems Engineer
> > Siemens Energy & Automation
> > Atlanta, GA
> > 
> > _______________________________________________
> > SECC mailing list
> > SECC@contesting.com
> > http://lists.contesting.com/mailman/listinfo/secc
> 
> 
> __________________________________________________
> Do you Yahoo!?
> The New Yahoo! Search - Faster. Easier. Bingo
> http://search.yahoo.com
> _______________________________________________
> SECC mailing list
> SECC@contesting.com
> http://lists.contesting.com/mailman/listinfo/secc
> 

_______________________________________________
SECC mailing list
SECC@contesting.com
http://lists.contesting.com/mailman/listinfo/secc
<Prev in Thread] Current Thread [Next in Thread>