I believe you! This is in line as to what I wrote you yesterday, that if
the line was too long for the paper size and then the points would be
printed off in space except the whole line is too long and the points are
falling off. I'm surprised they did not do a wrap around and wind up on a
separate line under the other log info. I have had this unintentional wrap
around happen to me, or have had my columns not line up, and have had to
experiment with different fonts and type sizes until I got everything the
way I wanted it. Depends on what printer, fonts, etc., you are using. I
can have a log, summary sheet, etc., print perfectly at home then try it at
work (during lunch hour of course) on a laser jet and not print properly.
Thomas R. Williams wrote:
> OK guys. I'm not crazy. This does happen. Starting at Version 6.26, Tree
> included an extra input when doing POST L A. This is for additional
> information to be added to the log. Since the ARRL requires the exchange
> sent on each line, and TRLog defaults to only the RST, I added 599 08.
> This apparently pushes the line length over 80 characters and the points
> disappear. Not just off the CRT, but nowhere to be found. I now realize
> that just adding my zone (08) will work, but there is obviously a limit
> to the number of additional characters that can be sent. Sorry for the
> bandwidth.
> 73,
> Tom N2CU (another happy TRLog user)
>
> --
> FAQ on WWW: http://www.contesting.com/trlogfaq.html
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|