Hi Don,
KF4ZTJ@aol.com wrote:
> I cannot get TRLog to talk to my TS-570, although I can key the rig with it
> using the serial port.
> I've tried every combination of jumpers and baud settings that I can think of.
> If this has been addressed on the reflector before I'd appreciate direction to
> the articles.
Check if you use STRAIGHT serial cable (not twisted). Note: null modem cables
are
TWISTED ones!
Use 4800-2 option on TRCVR menu (this is the default value in TRLog). After
switching the speed you should turn off and on the rig to validate the option.
--
73,
Jerry UA9AR
http://www.rossiya.net/ua9ar.htm
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|