Start SBDVP with -P1 which tells SBDVP to send PTT to your radio from
Parallel 1 port
Igor, UA9CDC
-----Èñõîäíîå ñîîáùåíèå-----
Îò: Nick Cooling <ncooling@velocity.net>
Êîìó: 'tr log server' <trlog@contesting.com>
Äàòà: 3 àâãóñòà 1999 ã. 4:34
Òåìà: [TRLog] sbdvp and connections
>
> I am having trouble with TR 6.40 in regards to the sbdvp program. I
>built a cable for the parallel port to control cw and ssb. The cw works
>fine I pulled pin 18 for the ground and pin 17 routed through a NPN diode
>and to the cw jack. I setup the ssb in parallel as suggested by another
>email from the server. I know I have the connections correct because I can
>key up the radio from the Mic jack in cw mode but not in ssb mode. Is there
>something in the programming that I can modify the software to key up the
>radio in ssb mode for the length of the voice recording.
>
>Nick N3TOZ
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/trlogfaq.html
>Submissions: trlog@contesting.com
>Administrative requests: trlog-REQUEST@contesting.com
>Problems: owner-trlog@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|