Hi Tree.
I tried it, but I was not able to make it run.
I recieve a message : INVALID STATEMENT IN CONFIG FILE
The .cfg file is as follows
MY CALL = LU6ETB
CONTEST = CQ WW
DISPLAY MODE = COLOR
KEYER RADIO ONE OUTPUT PORT = PARALLEL 2
PADDLE PORT = 2
RADIO ONE TYPE = TS850S
RADIO ONE CONTROL PORT = SERIAL 2
PACKETINPUTFILE = aug.pkt
I Have tried also with
PACKET INPUT FILE
PACKET INPUT FILENAME
And I receive allways the same message
What am I doing wrong. ?
73 de Arturo, LU6ETB
> - Added PACKETINPUTFILE startup command. Next parameter is filename
> > of ASCII file to process. Spots will be loaded in from the file
> > two per second. They will be passed around to the network just as
> > if they were received from a TNC. There is also a file PACKET.ZIP
> > included with the program with one month's worth of data to play
> > with. The format for the file is the same as the generated when
> > using the PACKET LOG FILENAME command.
> >
> >
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|