On Mon, Nov 20, 2000 at 09:37:34PM -0700, Rod Greene wrote:
>
> I also noticed that the second radio switch over process would not always work
> either. I would do the alt-D and then the space bar to load the
> call. Sometimes
> this wouldn't work and the call wouldn't load and the focus wouldn't switch
> to the
> second radio (ie, it stayed on the run band). If I exited the program and
> restarted
> it, this would all work fine for awhile and then not. After awhile, I
> stopped using
> this feature and just did the alt-R routine. Is this two radio process
> primarily designed
> for CW? If so, maybe there is something missing in the process when doing
> SSB?
>
What version were you using?
Do you have TWO RADIO MODE = TRUE?
I used 6.54 and I had no problems - except when I
tried to all dupes - then TR does what you describe.
--
George Fremin III
Johnson City, Texas "Experiment trumps theory."
K5TR (ex.WB5VZL) -- Dave Leeson W6NL
geoiii@kkn.net
830-868-2510
http://www.kkn.net/~k5tr
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|