Over the Holidays, I finished building an interface using the
parallel port. The keyer functions properly.
CW output is fine. The footswitch works as it should. I even have the
voice keyer (Speech Master)
calling CQ from pin 3. I have PTT working fine when operating CW, or
with the footswitch What I don't
have is PTT output in conjunction with the voice keyer.
In a single mode contest, or on the low bands, I can work around
this. What I was hoping to do, was to
make the station as "Fool Resistant" as possable for VHF Contests. My
goal was to have that single point PTT
output from TR, key a sequencer, therby protecting preamps and relays.
I've read all the .CFG commands and I don't see any way to enable
PTT that is related to pin 3.
Have I missed one? Or can anyone suggest a way to accomplish this, that
I have missed?
Thanks in advance for your help!
Bob N3RN
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|