No problem, man...works just great, BUT:
The default address for the 746 is 56h or 56 hex. TR will only respond to
the decimal equivalent which
is 86 (5 X16 = 80 + 6 = 86) OK.
So your TR logcfg.dat file (or other config file wherever you run it from)
will be:
RADIO ONE TYPE = IC746 (assuming it's radio one, of cours)
RADIO ONE ADDRESS = 86 (assuming the default of 56h)
RADIO ONE BAUD RATE = 9600 (or whatever speed you wish)
Other than that, it works just great.
Larry, N0XB
-----Original Message-----
From: Larry Menzel [mailto:retire@rconnect.com]
Sent: Thursday, March 28, 2002 9:53 AM
To: retire@rconnect.com
Subject: Fwd: [TRLog] Icom 746 compatibility
>From: "Mike Brown" <k9mi@arrl.net>
>To: <TRLog@contesting.com>
>X-Mailer: Microsoft Outlook Express 6.00.2600.0000
>Subject: [TRLog] Icom 746 compatibility
>Sender: trlog-admin@contesting.com
>X-BeenThere: trlog@contesting.com
>X-Mailman-Version: 2.0.5
>List-Help: <mailto:trlog-request@contesting.com?subject=help>
>List-Post: <mailto:trlog@contesting.com>
>List-Subscribe: <http://lists.contesting.com/mailman/listinfo/trlog>,
> <mailto:trlog-request@contesting.com?subject=subscribe>
>List-Id: TR Log logging software. <trlog.contesting.com>
>List-Unsubscribe: <http://lists.contesting.com/mailman/listinfo/trlog>,
> <mailto:trlog-request@contesting.com?subject=unsubscribe>
>List-Archive: <http://lists.contesting.com/pipermail/trlog/>
>Date: Tue, 26 Mar 2002 20:05:16 -0500
>
>I should be receiving my new/used 746 in a couple of days,
>right before WPX. I'm not at this time going to spend the
>bucks for the interface until I see how I like the rig. So, I
>will be roughing it without computer control this weekend.
>Just curious if there are any TRLog/746 users out there,
>and was curious if TRLog and the 746 get along together.
>Prior rig was a TS 850, and that worked great with TRLog.
>
>73 - Mike K9MI
>
>
>
>_______________________________________________
>TRLog mailing list
>TRLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
|