Hi there,
I have run into this problem in a variety of setups. Version
6.71b has problems in dos mode in Windows 98 (pentium I), and
straight dos 6.22 on a 386 machine. I found that the clock would
run ok with v6.71b in dos mode with windows 95, but there were
other problems.
I previously was having a problem with 6.68 with Win95/Pentium,
but that problem turned out to be NORTON... once I rem'ed that
out, 6.68 works fine. For now, I am sticking with 6.68 until
some of the new gremlins are dealt with.
cheers, Paul - VA7NT
On Sun, 03 Nov 2002 17:37:52 -0600 lenrev@ameritech.net wrote:
> I used 6.71B ( I think that was the most recent release) in
> SSCW this weekend.
>
> I am using a Dell P3/966, 384Mb RAM, 40Gb. HDD, W2K Pro,
> with a Lava 4-port serial card. The TS2000 and CW interface
> are only active devices on the card during the contest.
>
> Specific suprises I found:
>
> 1. If I tried to access any control functions, i.e. edit
> previous log entry, adjust time, etc. while TR is sending
> CW, the CW timing iand characters are clobbered. I think I
> recall being able to do this sometime in past versions.
>
> 2. Sunday afternoon I realized that TR time was way behind
> real time. I use Diminsion 4 to keep the computer time
> accurate through a DSL connection. After resyncing TR with
> computer time I found I had to continually correct TR time.
> The TR time was as much as five minutes behind within twenty
> minutes. I had to reset TR time every 15 minutes or so to
> keep the log somewhere close. I was running most of that
> time, but did some S&P as well.
>
> Did anyone else see this or do I have a computer issue,
> maybe?
> Len Revelle N9IJ
> lenrev@ameritech.net
> AMA 60055 LSF 7492
> My career goal is to retire.
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
cheers, Paul - VA7NT ex VE7CQK - email: paule@sfu.ca
"Those who hear not the music. . . think the dancers mad."
|