I have been using TR for years and have always been very pleased with the
performance. This past week, the family received a new computer. As a result,
I
have received for my shack at 1GHZ Pentium III to replace the Very Old
Pentium I that I had in the shack.
Never had a problem with the interface between the radio and computer before.
The old system was running Windows 95. New system runs Windows ME.
Anyway, I can get the computer to key the rig with no problem. Cannot get
the rig (TS-2000) and the computer to talk on the serial port. I have made
sure
that the rig and the computer ports are set up properly. I have changed the
BIOS on the computer to reflect the correct address. Have tried with my
TenTec Omni VI as well and no go.
Checked the cable by connecting the TS-2000 to an old laptop and it worked
great. I know there is some simple solution, but not being a computer wizard,
I
am at a loss.
Anyone have any suggestions? Would be truly appreciated.
Thanks for reading!
Jim
K3WU
|