[Trlog] Re: Orion with test TRLog

[John Unger <w4au@verizon.net>]

OK, I think I'm beginning to see some real differences between the way the 
Omni VI and the Orion behave with the new software.

Omni VI+ on Test Radio Interface page (with VFO @ 21.042.2):
Latest Radio One Status
21.042.2  15 CW Transceive VFOA=   0.0 160 CW  0ff VFOB=   0.0 CW  0fff

The "previous" and "filtered" lines look the same and the freq readout is 
very stable and changes smoothly with the xcvr. ALT-B and ALT-V don't work 
but TR follows band changes on the rig fine. Mode changes when rig changes 
mode.

Orion on Test Radio Interface page (with VFOA @ 28050.0 & VFOB @ 14017.9:
Latest Radio One Status
  0.0 NON NON Transceive VFOA= 1296905.0 160 CW  T/R VFOB= 28050.0 CW 0fffff

But it changes sometime either one or both VFO readings will be 1447117.4; 
sometimes they will actually read the correct two VFO freqs; sometimes they 
will read the reverse of the two VFO freqs! The freq reading is not stable 
and changes among the possibilities listed above. I have attached the .bin 
files from the Orion.

Hope this helps.

73 - John, W4AU


At 12:16 AM 9/29/04, you wrote:
> On Wed, Sep 29, 2004 at 01:32:08AM -0400, John Unger wrote:
> > Hi Tree -
> >
> > Your test version seems to be working OK with my Omni VI+, but not with 
> the
> > Orion. The Orion works FB with the latest normal version of TR.
> >
> > I've attached the 2 bin files to this email to see if they can help you
> > figure things out.
>
> It looks like I am not keeping up with the fast baud rate for the Orion.
>
> I think I have a work around for that - try this version:
>
> www.kkn.net/~tree/tr681u.zip
>
> Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog