Hi Tree:
IRQ's. Yuck. I run TR on computers that are
also set up for CT. CT does not allow IRQ sharing for serial
ports. You are going to have to look at IRQ's other than
3/4. :-( Perhaps this should be configurable? I'll have
to check and see which other interrupts are typically used
for the other COM ports (COM 3, 4, 5, and 6) on those
computers.
It's really much, much easier not to have to worry about
IRQ conflicts with the current software! (As you are
VERY well aware).
73,
Mark, KD4D
[...]
>
> BTW - for the Orion and new way I collect data from the serial ports, I
> am going to have to break down and teach TR how to deal with ISRs. However,
> I intend to intercept both interrupts (3 and 4), so it shouldn't matter
> how they are setup - I will find the offending UART.
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|