On Fri, Oct 01, 2004 at 07:51:25PM +0000, kd4d@comcast.net wrote:
> IRQ's. Yuck. I run TR on computers that are
> also set up for CT. CT does not allow IRQ sharing for serial
> ports. You are going to have to look at IRQ's other than
> 3/4. :-( Perhaps this should be configurable? I'll have
> to check and see which other interrupts are typically used
> for the other COM ports (COM 3, 4, 5, and 6) on those
> computers.
>
> It's really much, much easier not to have to worry about
> IRQ conflicts with the current software! (As you are
> VERY well aware).
It will be an option - probably only needed if you are using a
57,600 baud radio. Too bad the Orion doesn't have an option to
slow down the serial port to 4800 baud.
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|