TRLog
[Top] [All Lists]

Re: [Trlog] Win95 and Trlog

To: Lee Zalaznik <lee.zalaznik@sbcglobal.net>
Subject: Re: [Trlog] Win95 and Trlog
From: Ron Rossi <kk1l@intergate.com>
Reply-to: kk1l@arrl.net
Date: Sun, 26 Nov 2006 01:09:37 -0500
List-post: <mailto:trlog@contesting.com>
Try changing the following in CTRL-J menu:

RADIO ONE TRACKING ENABLE = FALSE
RADIO TWO TRACKING ENABLE = FALSE

73 es God Bless de KK1L...Ron Rossi (kk1l@arrl.net) <><
QTH: Jericho, Vermont
My page: http://www.intergate.com/~kk1l

Lee Zalaznik wrote:
> Ron,
> 
> This question was already asked on the reflector and I did not see a 
> response.   I did not want to repost this but I also was doing some 
> testing on the newer versions of TRLog.  Using any of the new versions 
> below 6.85 i.e. 6.84, 6.83, etc the Alt-V, Alt-B, & Alt-M key will 
> change bands or modes in standalone mode no radios connected, 6.85 will 
> not!  It is stuck on 160m CW only!  The only connection I am using 
> between TRLog and a Drake T4XB is to key the transmitter.  Yes, I still 
> have a radio that old and have used it in various contests.  Version 
> 6.79 still works fine.
> Any ideas?
> 
> 73, Lee  KI6OY
> 
> At 06:21 11/25/06, you wrote:
>> Andre,
>>
>> True for the most part. I have been using W98SE for many years now.
>> TRLog will not communicate with windows only virtual serial ports for
>> example ones on a multi port PCI card or serial to USB ports...at least
>> I have been unsuccessful with this. I HAVE been able to get WinTelnetX
>> to use a virtual port to feed cluster info to a "real" serial port 
>> though.
>>
>> You will find that the most modern windows version may allow TRLog to
>> run, but the clock may not keep correct time, and the parallel and
>> serial ports will be unavailable.
>>
>> I saw your post about getting locked into 160m. That is a bit odd. Can
>> you describe your platform and radios?
>>
>> 73 es God Bless de KK1L...Ron Rossi (kk1l@arrl.net) <><
>> QTH: Jericho, Vermont
>> My page: http://www.intergate.com/~kk1l
>>
>> dl8wx@darc.de wrote:
>> > With W95 there is no need to run TRLOG under DOS - you can start Trlog
>> > as a regular program und run it with all the W95 capabilities to
>> > increase memory for the program.
>> >
>> > 73, Andre (DL8WX)
>> >
>> > _______________________________________________
>> > Trlog mailing list
>> > Trlog@contesting.com
>> > http://lists.contesting.com/mailman/listinfo/trlog
>> >
>> >
>> >
>>
>> _______________________________________________
>> Trlog mailing list
>> Trlog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
> 
> 
> 

_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>