I use TR4W ver 4.01 with winkey which is built into Microham Microkeyer II.I
had no issues with CW speed at all. I also sometimes use N1MM with MKII, I
just came to the conclusion that Windows based software can only send proper
CW using external CW processor like Winkey or similar.
73, Igor UA9CDC
>
> I noticed this in N5XZ's 3830 post:
>
>> Well, I started out thinking I might be half serious for this contest,
>> then
>> reality hit me and I had too many chores to take care of. I did mess
>> around the
>> first night on 40, but I was having key speed problems with my copy of
>> TR4W (I
>> opted not to use WriteLog due to a different keying problem KL7FH and I
>> have
>> been experiencing with that software.) I could not adjust my speed between
>> 25
>> and 35 WPM.it would just jump, nothing in between. And the keying was not
>> very
>> smooth some of the time. So I was either at 25 WPM (slow) or 35 WPM
>> (fast).
>> Maybe I better install N1MM instead (?). Anyone using TR4W experience any
>> CW
>> speed adjustment problems?
>
> Also - his Cabrillo log is missing all of the exchange information. I
> don't
> use TR4W - so I can't help.
>
> Tree
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|