I just discovered that if rig and TR are in CW mode then there is no delay
but there is the 3 second delay in SSB mode.
Do that help anyone one guess as to what is going on?
I am using smartdrv as suggested and it is running.
Mike W9RE
-----Original Message-----
From: trlog-bounces@contesting.com [mailto:trlog-bounces@contesting.com] On
Behalf Of KL7RA
Sent: March 01, 2009 5:44 PM
To: trlog@contesting.com
Subject: Re: [Trlog] CQ160 and version 6.93
Mike,
In the golden days of TRLog this "slow" stuff would come up
now and then.
Using a DOS field manual I played around with all the commands
and found this to be the best command line for autoexec.bat.
It always fixed anyone's problem. I did have some "experts" take
this command line on but I was always able to defend the settings.
I don't remember what they mean or do now of course.
Sadly I'm now switching to win-test. I have finally seen the way. I
was hoping to be the last one to switch but I see you are still in there,
good luck.
73 Rich KL7RA
@ECHO OFF
PROMPT $p$g
PATH C:\DOS;c:\log
set TZ=UTC
LH /L:0;1,42384 /S C:\DOS\SMARTDRV.EXE
C:\DOS\smartdrv/c
C:
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|