Got 'er going thanks to various suggestions.
1) That was it. The the serial and parallel ports were disabled in the BIOS
The cable is okay. Picked up a new cable just in case.
Thanks for the many suggestions. It has taken weeks to get this going
for one reason or another.
73, Paul
ve3zt
+++++++++++++++++++++
At 12:18 PM 16/04/2010, you wrote:
>Hi Paul:
>
>Three suggestions that might help:
>1) Make sure serial port isn't disabled in the BIOS.
>2) Set the baud rate in the logcfg.dat file.
>3) Double check that you aren't accidentally using a null modem cable.
>
>The MSDOS "msd" utility will show the installed serial ports. You
>might also try that.
>
>73,
>
>Mark, kd4d
>
>paul@paul-hicks.ca wrote:
>
> >Hi there,
> >
> >I have a IBM A30p ThinkPad with a partition with FreeDOS build
> 2036 installed.
> >
> >Am using latest version 6.94 TR-Log.
> >
> >DB9 connects FT1000MP to DB9 on Thinkpad.
> >
> >Using very simple logcfg.dat file trying to troubleshoot, but out of ideas.
> >
> >MY CALL = VE3ZT
> >
> >CONTEST = GENERAL QSO
> >
> >DISPLAY MODE = COLOR
> >
> >RADIO ONE TYPE = FT1000MP
> >
> >KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
> >
> >RADIO ONE CONTROL PORT = SERIAL 1
> >
> >i have tried changing the value of Serial 1 to 4.
> >
> >Have also swapped out the serial cable. Same results.
> >
> >Can anybody help me out with some idea?
> >
> >Thank you.
> >
> >Paul
> >ve3zt
> >
> >_______________________________________________
> >Trlog mailing list
> >Trlog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/trlog
>
>--
>Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>
>
>
>Checked by AVG - www.avg.com
>Version: 9.0.801 / Virus Database: 271.1.1/2814 - Release Date:
>04/16/10 02:31:00
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|