I still cant get this FT1000D to talk to TR. I'm beginning to suspect a bad
port in the radio.
But first i have a couple dumb questions...
I keep finding references to the FT1000D using "2" data bits instead of the
usual 1.
Do i change that in TR? I don't seem to see a command to do it.
Else I am guessing i do it in DOS? I've used the command Mode Com1:
4800,N,8,2 to no effect.
Other than that I'm out of ideas. My config file has this in it:
Radio one control port = serial one
radio one baud rate = 4800
radio one type = ft1000d
Yaesu response timeout = 1000
I've verified the FT1000D has Eprom version 6.0 in it.
I've tried the radio to computer via both a fif-232 and W1GEE cable.
Any other ideas?
Thanks!
Scott NE9U
----- Original Message -----
From: "Tree" <tree@kkn.net>
To: "Jasper---NE9U" <skjasper@att.net>
Cc: <Trlog@contesting.com>
Sent: Monday, November 29, 2010 10:02 PM
Subject: Re: [Trlog] FT1000D interfacing
> On Mon, Nov 29, 2010 at 09:47:51PM -0600, Jasper---NE9U wrote:
>> Are there any tricks getting a FT1000d to talk to TR successfully via a
>> Yaesu FIF-232C box?
>>
>> I've been trying all night with no luck. (no problems with same computer
>> and my IC765)
>>
>> The only statements i can think of having in my .cfg file are these:
>>
>> Radio one control port = serial one
>> radio one baud rate = 4800
>> radio one type = ft1000d
>>
>> I've been using version 6.73 and included this statement
>>
>> yaesu response timeout = 100
>
> Do you know if your 1000D has the necessary firmware? Sometime around
> 1993 or
> something, they put out a firmware update to make it work for logging
> software.
> If you don't have that version, it isn't going to work.
>
> I used to have that information written down somewhere.
>
> A quick google search found this:
>
> http://lists.contesting.com/_yaesu/2006-06/msg00050.html
>
> Looks like maybe you need version 6.
>
> Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|