TRLog
[Top] [All Lists]

Re: [Trlog] TR 700 issue

To: <w0yk@msn.com>, "'Ed Schuller'" <eschuller@sbcglobal.net>
Subject: Re: [Trlog] TR 700 issue
From: "Mike Wetzel" <mjwetzel@comcast.net>
Reply-to: mjwetzel@comcast.net
Date: Fri, 17 Dec 2010 10:44:21 -0500
List-post: <trlog@contesting.com">mailto:trlog@contesting.com>
Ed,

I am running Windoz 98, and not starting the GUI.

Mike W9RE

-----Original Message-----
From: Ed Muns [mailto:w0yk@msn.com] 
Sent: December 17, 2010 10:19 AM
To: mjwetzel@comcast.net; 'Ed Schuller'
Cc: trlog@contesting.com
Subject: RE: [Trlog] TR 700 issue

Mike, W9RE, wrote:
> Here is my config.sys file that works on my computer with 7.00.
> 
> Can't remember much about this computer as it is pretty old.  
> It is a Gateway P5-90 upgraded to a 133Mhz.  FWIW
> 
> DEVICE=C:\WINDOWS\HIMEM.SYS
> DEVICE=C:\WINDOWS\EMM386.EXE NOEMS
> rem device=c:\dos\ramdrive.sys 2048 512 64 /e rem 
> device=c:\windows\ramdrive.sys 2048 512 64 /e BUFFERS = 13,0 
> DOS=HIGH, UMB
> LASTDRIVE=E:
> rem FCBS=4,0
> DOS=HIGH
> STACKS = 9,256
> FILES = 40
> rem SHELL=C:\DOS\COMMAND.COM C:\DOS\ /E:1024 /p

Now, I'm confused again.  "NOEMS" is in your EMM386 statement and 7.00 works
for you ... just the opposite of my experience.  Are you using native MS-DOS
6.22 or a DOS window in Windows 98?

I run TR-Log in native MS-DOS 6.22 and starting TR-Log with "NOEMS" in my
EMM386 statement causes the computer to immediately re-boot.

Ed - W0YK


_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>