Working on implementing Latch Mode with the SO2R mini.
Basically - the way this is supposed to work (I think) is that when you are
transmitting on radio #1, you are listening to #2. When you are done with
that - you are back to listening to whatever you were listening to before
you started transmitting (which could be radio 1, radio 2 or stereo).
Some thing if you start transmitting on radio #2.
Is there something I am missing?
The actual implementation is going to be a bit more complicated as you can
go into and out of latch mode during the transmission of a specific CW
message (using characters embedded in the CW message). So you could actual
implement your own custom latch mode using these commands.
So - if you have some kind of message that you want to make sure come out
of in a particular headphone state - it will over-ride what the latch mode
would have told it to do. That might - or might not - disable latch mode
(need to work out the details).
I can also probably do something different if the CW is being sent from the
paddle... like not switch the audio to the non-transmitting radio so you
can listen to your sidetone.
Any thoughts about all of this?
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|