Tree,That did the trick. It works now! Thank You.it worked for memory 1 to 3
not for 4? and now if I press the enter key on the call input line it plays the
"f1" memory.
James
On Wednesday, December 13, 2023 at 09:00:42 PM CST, Tree <tree@kkn.net>
wrote:
In order to send binary data to the radio - you will have to use a special
format for the memory command.
FE FE 94 E0 28 00 01 FD
Would be this:
CQ SSB MEMORY F1 = <03>SRS=<FE><FE><94><E0><28><00><01><FD><04>
The <03> is a control-C which indicates this is a command as opposed to text of
a CW message. The <04> is a control-D which terminates the command.
SRS= means that what comes after the equals sign will be sent to the active
radio. You can use SRSI if you want it to go to the inactive radio.SRS1 for
radio 1 and SRS2 for radio 2.
Tree
On Wed, Dec 13, 2023 at 1:42 PM James Pahoundis via Trlog
<trlog@contesting.com> wrote:
IC-7300.
On Wednesday, December 13, 2023 at 03:38:20 PM CST, George Fremin III
<geoiii@kkn.net> wrote:
What sort of radio?
George Fremin III
> On Dec 13, 2023, at 2:56 PM, James Pahoundis via Trlog <trlog@contesting.com>
> wrote:
>
> Hello, I seen in the linux manual it says we can use the radio's internal
> voice keyer. So I was trying to get itto work. setting up the cmd string for
> the radio is FE FE 94 E0 28 00 01 FD would be for slot 1.That did not seem to
> work. What am I missing? would love to get this working!
> Thanks for the help73 James.
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|