What kind of issues are you having compiling newer versions?
On Wed, Dec 13, 2023 at 8:22 PM James Pahoundis <kc6ucn@yahoo.com> wrote:
> I did not think of that. I have 8 so I can just use the others. I have not
> programed past 4 so I have not tried them yet.
> now if I could just get a newer version to compile without erroring out I
> will be doing good. I am using .050 on a pi 3b.
> James
>
> On Wednesday, December 13, 2023 at 10:03:57 PM CST, Tree <tree@kkn.net>
> wrote:
>
>
> Probably the issue with it not working for memory 4 is that the <04> is
> interpreted as the end of the command - so it never gets sent to the
> radio. Maybe I can put a change in the software that it still gets sent -
> will look at it.
>
> Maybe we should have used a null character for the end of the "string" -
> but that would not work either.
>
> The reason a termination character is necessary is that if a radio command
> is embedded in a CW message (like to clear the RIT during the QSL MESSAGE)
> there needs to be a way to tell the difference between the message and the
> command.
>
> Guess you will just have to make do without memory 4 for now.
>
> Tree
>
> On Wed, Dec 13, 2023 at 7:25 PM James Pahoundis <kc6ucn@yahoo.com> wrote:
>
> Tree,
> That did the trick. It works now! Thank You.
> it worked for memory 1 to 3 not for 4? and now if I press the enter key on
> the call input line it plays the "f1" memory.
>
> James
>
> On Wednesday, December 13, 2023 at 09:00:42 PM CST, Tree <tree@kkn.net>
> wrote:
>
>
> In order to send binary data to the radio - you will have to use a special
> format for the memory command.
>
> FE FE 94 E0 28 00 01 FD
>
> Would be this:
>
> CQ SSB MEMORY F1 = <03>SRS=<FE><FE><94><E0><28><00><01><FD><04>
>
> The <03> is a control-C which indicates this is a command as opposed to
> text of a CW message. The <04> is a control-D which terminates the command.
>
> SRS= means that what comes after the equals sign will be sent to the
> active radio. You can use SRSI if you want it to go to the inactive radio.
> SRS1 for radio 1 and SRS2 for radio 2.
>
> Tree
>
>
>
> On Wed, Dec 13, 2023 at 1:42 PM James Pahoundis via Trlog <
> trlog@contesting.com> wrote:
>
> IC-7300.
>
> On Wednesday, December 13, 2023 at 03:38:20 PM CST, George Fremin III <
> geoiii@kkn.net> wrote:
>
> What sort of radio?
>
> George Fremin III
>
> > On Dec 13, 2023, at 2:56 PM, James Pahoundis via Trlog <
> trlog@contesting.com> wrote:
> >
> > Hello, I seen in the linux manual it says we can use the radio's
> internal voice keyer. So I was trying to get itto work. setting up the cmd
> string for the radio is FE FE 94 E0 28 00 01 FD would be for slot 1.That
> did not seem to work. What am I missing? would love to get this working!
> > Thanks for the help73 James.
> > _______________________________________________
> > Trlog mailing list
> > Trlog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|