TenTec
[Top] [All Lists]

OMNI-VI Cable Diagrams

To: <tentec@contesting.com>
Subject: OMNI-VI Cable Diagrams
From: wwalsh@intac.com (Warren Walsh)
Date: Tue, 18 Jun 1996 10:07:26 -0400 (EDT)
The following diagrams are for cables I have used with my OMNI-VI.  They
work with CT8, CT9, NA8, and NA9, and they also work with my everyday
logging program - Hyperlog and my beta version of Hyperlog Pro. As for
computers I've used everything from a old 286 to a Pentium 100.  I've also
used this setup in M/M situations at N2RM, and for FD with WA2SNA and had no
problems.

    DB9 Female   to     DB25 Male           
    PC COM              OMNI-VI
    Pin 2               Pin 3
    Pin 3               Pin 2
    Pin 5               Pin 7

    DB25 Female  to     DB25 Male
    PC COM              OMNI-VI
    Pin 2               Pin 2
    Pin 3               Pin 3
    Pin 7               Pin 7

Use three conductor shielded cable and terminate the shield to the connector
hood. If anyone has any questions please feel free to ask.

73,
Warren Walsh - N2BCC
wwalsh@intac.com


<Prev in Thread] Current Thread [Next in Thread>