I can testify that Warren is correct! I wired a DB9-to-DB25 adapter =
cable for my DB25-to-DB25 radio control cable. The adapter cable did =
not work. =20
Then I saw Warren's message this evening, swapped pins 2 and 3 of=20
the DB9 and Bingo! The radio and NA talk to each other. Thanks, =
Warren!!
The OMNI VI Manual is dead wrong on the DB9 pin-out.
73,
Dale Martin, KG5U
kg5u@hal-pc.org
homepage: http://www.hal-pc.org/~kg5u
----------
From: Warren Walsh[SMTP:wwalsh@intac.com]
Sent: Tuesday, June 18, 1996 5:07 AM
To: tentec@akorn.net
Cc: na-user@ve7tcp.ampr.org; ct-user@ve7tcp.ampr.org
Subject: OMNI-VI Cable Diagrams
The following diagrams are for cables I have used with my OMNI-VI. They
work with CT8, CT9, NA8, and NA9, and they also work with my everyday
logging program - Hyperlog and my beta version of Hyperlog Pro. As for
computers I've used everything from a old 286 to a Pentium 100. I've =
also
used this setup in M/M situations at N2RM, and for FD with WA2SNA and =
had no
problems.
DB9 Female to DB25 Male =20
PC COM OMNI-VI
Pin 2 Pin 3
Pin 3 Pin 2
Pin 5 Pin 7
DB25 Female to DB25 Male
PC COM OMNI-VI
Pin 2 Pin 2
Pin 3 Pin 3
Pin 7 Pin 7
Use three conductor shielded cable and terminate the shield to the =
connector
hood. If anyone has any questions please feel free to ask.
73,
Warren Walsh - N2BCC
wwalsh@intac.com
--
Submissions: na-user@ve7tcp.ampr.org
Administrative requests: na-user-REQUEST@ve7tcp.ampr.org
Questions: owner-na-user@ve7tcp.ampr.org
|