TenTec
[Top] [All Lists]

[TenTec] OMNI-VI and SB-220

To: <tentec@contesting.com>
Subject: [TenTec] OMNI-VI and SB-220
From: w6sx@ptw.com (Hank Garretson)
Date: Sat, 28 Jun 1997 12:36:17 -0700
I use both an SB-200 and an AL-1200 with my VI.  In my opinion, best bet is
to modify the amp for RF bias switching and use a TR switch (old Johnsons
are great) to get receive RF into the aux antenna jack on the Omni.  There
have been any number of articles and Hints and Kinks pieces in QST on how to
modify amps for RF bias switching, including two by me on the SB-200 and
AL-1200.  I am pretty sure there was an article on how to modify the SB-220.  

RF bias switching is the way to go.  No relays to wear out.  No timing
problems.  No RF-dissipating PIN diodes which also burn out.  Dramatically
cooler running amplifier.      
73,

Hank W6SX



At 11:48 6/28/97 -0500, JAMES T BRANNIGAN wrote:
>Greetings,
>Has anyone tried to modify a Heath SB-220 to QSK with the OMNI-VI?
>How does TT QSK their amps?
>I have Rich Measures article from QST. He uses vacuum relays and a 
>timing circut. There must be a simpler method, using the TX-in TX-out 
>connectors on the OMNI. 
>
>
>Whatsa?
>Jim WB2TPS
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>

w6sx@ptw.com


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>