TenTec
[Top] [All Lists]

[TenTec] Can you help us?

To: <tentec@contesting.com>
Subject: [TenTec] Can you help us?
From: sales@tentec.com (Ten-Tec, Inc.)
Date: Tue, 07 Oct 1997 07:05:44 Eastern Daylight Time
Hi all:

We have a customer in Nigeria who is seeking information on Magnus
Electronics, formerly located in Chicago, IL.  Magnus, for a number
of years, was the exclusive foreign distributor for Ten-Tec amateur 
radio equipment but we stopped using them for this a number of years
ago and have had no contact with them since at least 1990.  Magnus
either manufactured or had "private-labeled" a number of crystal
controlled HF transceivers that the gentleman in Nigeria is trying to
obtain schematics and service information for but we have been unable
to locate any info.  The last phone number and address we have is
3500 Devon Ave., Chicago, IL 60659, (312) 679-6070.  This phone number
comes back as disconnected and Chicago directory assistance has no
listing.  Our customer in Nigeria "thinks" they have moved a couple of
times in recent years but has nothing to back that thought up. 

If you have service information for Magnus, or can provide any contact
information, we would be glad to have it to pass along to them.  As
you can imagine it's a little tough to try to do this from Nigeria! 
Please reply to <sales@tentec.com> 

73,
Scott Robbins, W4PA
Amateur Radio Product Manager, Ten-Tec, Inc. 
   


---------------------------------------------------------------------
Ten-Tec, Inc., 1185 Dolly Parton Parkway, Sevierville, TN 37862 USA 
  Contact Mon-Fri Eastern time:  Office/Tech (423) 453-7172 9 am-5 pm.  
  Repair (423) 428-0364 8 am-4 pm.  Sales (800) 833-7373 9 am-5:30 pm.
  Fax (423) 428-4483 24 hrs.  E-mail <sales@tentec.com> for sales and
  general product info only.  We presently do not offer repair or
  kit building tech support by electronic mail, please telephone.
  Visit us at <http://www.tentec.com>

  Ten-Tec manufactures amateur radio equipment, military and commerical
  use HF radio equipment, custom aluminum and steel enclosures and has an
  on-premises, fully equipped tool and die facility supplying the metal
  and plastic injection mold industries.  Potential tool and die, custom 
  enclosure or communications electronics customer?  Contact us.
  


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Can you help us?, Ten-Tec, Inc. <=