TenTec
[Top] [All Lists]

[TenTec] TNC to Omni D hookup problem solved.

To: <tentec@contesting.com>
Subject: [TenTec] TNC to Omni D hookup problem solved.
From: chestert@pressroom.com (Chester Alderman)
Date: Fri, 07 Nov 1997 12:53:47 -0500
At 08:27 AM 11/7/97 MST, you wrote:
>Thanks all for your suggestions!
>
>Ken, W8EK, suggested putting a 100K ohm trimpot inside the Omni D on the
>"Patch-In" line.  I installed it last night and it did the trick!  I now
>have full control of output from QRP to 100W without the hair trigger
>effect.
>
>And thanks to Peter, KD7MW.  I especially liked his suggestion of running
>a small fan toward the heat sink of the Omni.  I will do that!

This really is a very good idea. Solid state's worst enemy is heat!! I have
several 12 vdc fans from old computer dead power supplies that work great.
The main idea is to increase the air circulation over the heat sink fins. I
shape a cut-up coat hanger to form a bracket to support the fan in the back
of the rig (OmniD, Corsair, Omni 5 & 6, etc.) and I use the 12vdc aux
output on the back of the rig, for the fans power source.

73,


>
>73 to all!  I hope to hook up with many of you on Pactor or other HF
>digital mode.
>
>R Ogborn - KI0ER
>Littleton, Colorado, U.S.A
>ki0er@amsat.org
>
>--
>FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
>Submissions:              tentec@contesting.com
>Administrative requests:  tentec-REQUEST@contesting.com
>Problems:                 owner-tentec@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
Chester Alderman
Tom - W4BQF
chestert@pressroom.com


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>