You might not see any significant grid current until you hit 50 or 60 watts
input. It depends on the loading. Try hitting it with a little more juice
and see what happens or decrease the loading.
-----Original Message-----
From: Kannegaard <Kannegaard@aol.com>
To: TenTec@contesting.com <TenTec@contesting.com>
To: <tentec@contesting.com>
Date: Monday, March 02, 1998 05:43
Subject: [TenTec] Titan Problem
>I just acquired a Titan Amplifier with a little problem. The Grid Current
>always registers zero. The needle wiggles a little but doesn't indicate any
>significant grid current. With 10W in from my Paragon, it seems to be
putting
>500 out to a dummy load but no grid current.
>
>Anyone out there have any ideas on where I should start looking?
>
>Jon, K6JEK
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|