>I had to do the same thing for CW....but took it a step
further...the COM
>output from the computer goes to a switch box...the box contains
an SSTV
>converter...DB-25 to a TNC and a keyed reed relay for CW
> (I use CT for contesting)...and switches all the audio leads!!!
>Now, I'll trade a DB-25 pin for CW for a DB-25 pin to the REV
button..This
>way I could mount a momentary switch on the remote
VFO....wouldn't that be
>dandy for split freq. DX'ing!!
That sounds neat....hmmm......
>But I think the DB-25 on the OMNI is filled up with band control
stuff...
Actually, it's not. If you are using a homebrew DB25 cable for
computer control/301 control, there are 10 pins on the Ten-Tec
DB25 panel connector available to wire stuff to
(4,5,9,11,12,13,18,19,20,22).
Well, there goes the weekend......
73,
dale, kg5u
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|